Rafter length calculator
Enter the span, the roof length and the pitch: the calculator works out the rafter length and the cut angles and gives you a lumber list — before you order the timber.
What it is for
On a roof, the cut list is the basis of the order: how long the rafters must be and at what angles they are cut. The calculator works this out from the roof geometry, so you do not find out on site that something is too short.
What you enter
- the span and the roof length;
- the roof pitch.
What you get
- the rafter length and the cut angles;
- a lumber list.
How it fits the job
The roof structure ends up hidden under the roofing and insulation too. The renovation page shows how you keep one timeline for the whole job in JobOptim.
Frequently asked questions
Does it replace a structural calculation?
No. The calculator works from the geometry (lengths, quantities); sizes and load capacity come from the designer or structural engineer.
What does it need?
The span, the roof length and the pitch.
Is it free?
Yes, no sign-up needed.
Document the job in JobOptim
Material quantities are the planning; photos during the work, the client’s progress page and the handover report happen in JobOptim.
What JobOptim does →