Tile calculator
Enter the area (floor or wall), any openings, the tile size and the grout joint: the calculator draws the layout, shows whole and cut tiles and the waste, and tells you how many tiles and boxes to buy.
What it is for
Before tiling, two questions always come up: how many tiles you need, and how the layout falls. If the first row starts in the wrong place, you end up with thin slivers at the edge or by the door, and more tiles go to waste. The calculator plans the layout and the quantity together, so you see the cuts before the first tile goes down.
What you enter
- floor or wall, and its size;
- openings, if it is a wall;
- the tile size and the grout joint;
- the laying pattern.
What you get
- the layout with the cut pieces marked;
- the number of whole and cut tiles, and the waste;
- the number of tiles and boxes to buy.
How it fits the job
Quantities are the planning. During the job, what matters is what ends up under the tiles. The tiling page shows how you document that in JobOptim, and the handover guide covers what to hand over at the end.
Frequently asked questions
How much extra should I allow?
The calculator works out the cut pieces and the waste from the layout, so you see the extra instead of guessing it. Whether you keep spare tiles on top is up to you.
Does it work for walls?
Yes: for floors and walls, with openings such as windows and doors on walls.
Is it free?
Yes, no sign-up needed.
Document the job in JobOptim
Material quantities are the planning; photos during the work, the client’s progress page and the handover report happen in JobOptim.
What JobOptim does →